Self-Supporting tires have stiffer and tougher rubber, which can temporarily carry the weight of the vehicle under lower tire pressure. When new tires are installed on the rear, it helps reduce the potential for your vehicle to oversteer and loss of vehicle stability in wet conditions.There are two main types of run flat tires: Self-Supporting, and Auxiliary Supported.New tires will provide better wet grip than your half-worn tires.Install two new tires on the rear axle Why put new tires on the rear axle? Watch the video below for more information: Do not mix tread pattern types such as all-terrain and all-season.Be sure that the outside circumference of all four tires is within one (1) inch of each other.All four tires must be either radial or non-radial. Do not mix radial and non-radial tires.All four tires must be branded with the same tire size. If no instructions for tire mixing appear in the vehicle owner’s manual, adhere to the following guidelines: What guidelines should I follow when mixing tires on 4WD vehicles? ![]() Vehicle handling may be affected, and the vehicle’s speed capacity is now limited to the lowest speed-rated tire. This is to prevent a potential oversteer condition. If tires of different speed ratings are mounted on a vehicle, the lower speed-rated tires should be placed on the front axle. Can I mix different speed-rated tires on my car?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |